EQ-3 MAX! Cube Service Manual download pdf (Page 11)

Setting up the MAX! system

•Plug the USB power supply unit provided into an easily ac-

cessible power socket outlet.

In order to completely disconnect the mains voltage

please plug out the power supply unit from the sock-

et.

•Before you reset the MAX! Connect the MAX! Cube and the

main adapter with the USB cable. Use the USB port on the

side of the device (2) for this purpose (see diagram on page 8).

•The power LED starts to flash as soon as the MAX! Cube

initiates a self-test.

•The power LED lights up continuously once the self-test

has been successfully completed and the power supply

is present.

6.1.2 Connect the MAX! Cube to the router/PC

•Connect the MAX! cube to a router. To do this, plug the

network cable supplied with the device into the designat-

ed port (1) on the side of the MAX! Cube (see diagram on

page 4). Connect the other end of the cable to a free Eth-

ernet port on your router.

•Connect the router to your PC.

•The Internet LED starts to flash as soon as the connection

to the router is active.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 20 21

No comments

EQ-3 MAX! Cube Service Manual Page 11